Accsess point tp-link cpe210 2.4ghz 300mbps 9dbi outdoor

Specification

Access Point 2.4GHz 300Mbps 9dBi Outdoor CPE210

HARDWARE FEATURESProcessor

Qualcomm Atheros 560MHz CPU, MIPS 74Kc

Memory

64MB DDR2 RAM, 8MB Flash

Interface

1 10/100Mbps Shielded Ethernet Port (Passive PoE in)1 Grounding Terminal1 Reset Button

Power Supply

Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)Voltage range: 16-27VDC

Power Consumption

10.5 Watts MaxNote: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.

Dimensions ( W x D x H )

224 x 79 x 60 mm

Antenna Type

Built-in 9dBi 2x2 Dual-polarized Directional AntennaBeam Width: 65° (H-Plane) / 35° (E-Plane)Note: For more details, please refer to datasheet

Protection

15KV ESD Protection6KV Lightning Protection

Enclosure

Outdoor ASA stabilized plastic materialIPX5 waterproof Certification

WIRELESS FEATURESWireless Standards

IEEE 802.11b/g/n (with Pharos MAXtream disabled)

Proprietary Protocol

TDMA Mode (with Pharos MAXtream enabled)

Wireless Speeds

Up to 300Mbps (40MHz,Dynamic)Up to 144.4Mbps (20MHz,Dynamic)Up to 72.2Mbps (10MHz,Dynamic)Up to 36.1Mbps (5MHz,Dynamic)

Frequency

2.4~2.483GHzNote: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.

Transmission Power

27dBm/500mw (Adjustable power by 1dBm)Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.

SOFTWARE FEATURESWireless Configurations

Pharos MAXtream TDMA Technology802.11b/g/n ModesSelectable Channel Width: 5/10/20/40MHzAutomatic Channel SelectionTransmission Power ControlDynamic Frequency Selection (DFS)WDS Enable/DisableSecurity: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP EncryptionSSID Broadcast Enable/DisableMulti-SSID with VLAN Tagging (AP mode only)Distance/ACK Timeout SettingWireless MAC Address FilterWireless Advanced:> Beacon Interval/RTS Threshold/Fragmentation>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia

Management

Discovery and Remote Management via Pharos Control applicationHTTP/HTTPS Web-based managementSystem LogSNMP Agent(v2c)Ping Watch DogDynamic DDNSSSH Server

System Tools

Wireless Signal Quality Indicators:Signal Strength/Noise/Transmit CCQ/CPU/MemoryMonitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCPSpectrum AnalyzerSpeed TestPingTraceroute

System-level Optimizations

Optimized IGMP Snooping/Proxy for multicast applicationsHardware watch dog

POE ADAPTER FEATURESDimensions(W x D x H)

110*57*33.5mm

Input Current

0.8A Max @ 100VAC

Input Voltage

100VA~240VAC @ 50Hz~60Hz

Output

24VDC, 1.0A Max+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)

Efficiency

>80%

Output Voltage

24VDC(+4,5pins; -7,8pins)

Input

100-240VAC, 50/60Hz

Power Status LEDs

0~0.8A: Green0.8A~1.0A: Red

Certifications

CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

Interfaces

1 AC Jack with Ground1 10/100/1000Mbps Shielded Ethernet Port (Power + Data)

Button

Remote Reset Button

OTHERSCertification

CE, FCC, RoHS, IPX5

Package Contents

Outdoor Wireless CPE24V 1A Passive PoE AdapterPole Mounting StrapsAC Power CordInstallation Guide

System Requirements

Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.

Environment

Operating Temperature: -30°C~70°C (-22℉~158℉)Storage Temperature: -40℃~70℃ (-40℉~158℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~95% non-condensing

Please contact us to know delivery cost